Scotsman CSW45 Specifications download pdf (Page 9)

Drain Pump Kit

1. Remove rear cover.

2. Remove old drain tube.

3. Install new drain tube to bin (use old clamp).

4. Install drain pump into machine. Carefully slide in

aligning the tab on the pump to the rectangular slot

in the unit base.

5. Attach bin drain tube from bin to pump.

6. Connect vent tube to vent connection on pump.

Route vent up through the rear cover. Secure vent

tube to back of ice machine using three clamps and

screws from the kit.

7. Route pump outlet tube to household drain.

8. Power cord from ice machine must be plugged

into pump. Coil up and tape power cord together,

insert between compressor and drain pump. Plug the

power cord into the pump.

9. Line up the two screws at the rear of the pump

and secure the pump using two screws from the kit.

10. Install rear cover.

11. Connect power cord (pump’s) into the electrical

power supply. This must be a grounded circuit that

conforms to the National Electrical Code and all local

codes and ordinances.

July 1999

Page 9

CSW45

Pump

Mounting Tab

Vent Tube

Pump

Mounting

Screws

Discharge

Hose

Pump, View from

Front of Cabinet

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

No comments

Scotsman CSW45 Specifications Page 9