Scotsman CSW45 Specifications download pdf (Page 22)

Repair Information

Cutting Grid

The cutting grid rests on two shelves molded into the

bin liner. It is also secured to the liner with two

screws.

1. Remove the three screws holding the cutter grid

cover to the grid.

2. Disconnect the three wiring harness plugs from

the control box.

3. Remove the screw holding the grid to the right

side of the liner.

4. Loosen, but don’t remove the screw holding the

grid to the left side of the liner.

Lift the front of the grid until the slot in the grid clears

the screw, the pull the grid forward and out of the

cabinet.

Control Box

The control box is located above the cutting grid. It is

suspended from the top panel by 4 screws. Its wiring

harness routes out the back of the control box

through a molded channel.

July 1999

Page 22

CSW45

Remove 3 Screws

Wire Harness Plugs

Loosen This

Screw

Remove This

Screw

1 2 ... 17 18 19 20 21 22 23 24

No comments

Scotsman CSW45 Specifications Page 22