Scotsman MDT6N90 Service Manual download pdf (Page 3)

FOR THE INSTALLER

Location

This ice system is designed to be installed indoors,

in a controlled environment.

Minimum Maximum

Air Temp 50

F. 100

Water Temp 40

F. 100

Water Pressure 20 psi 80 psi

Voltage 104 126

Operating the machine outside of the above

limitations, or outdoors, is potentially damaging to

the machine; also it is misuse of the machine

which may void the warranty.

Service Limitations

Do not install in a location where the top of the

machine is within 6" of a fixed ceiling. Air cooled

models require a minimum of 6 inches to the left

and right of the machine for air circulation. It is

important that the machine be installed in a

location where it has enough space above and

behind it for service.

After uncrating and inspection, the unit is ready for

installation.

Machine Stand Installation

Tip the stand on its back and install the legs, return

the stand to the upright position. Adjust leg levelers

so that the stand does not “rock”.

Counter Top or Machine Stand Installation

The base of the icemaker-dispenser must be

sealed to the object it rests upon. Food grade

silastic sealant such as Scotsman part number

19-0529-01 is recommended.

Place a bead of the sealant on the machine stand

or counter top to match the outside edge of the

cabinet base and sink.

The icemaker-dispenser is heavy: use of a

mechanical hoist is recommended to lift it to the

height required to install it.

The DMS machine stand has holes in the top that

match up with threaded holes in the base of the

machine. Secure the machine stand to the base

with 4 5/16" bolts.

In both counter top and machine stand

installations, wipe off and neatly smooth any

excess sealant. Level the machine stand and

cabinet.

Unpack and install the sink brackets. Fit the sink

assembly onto the two sink brackets, and press

onto the bead of sealant. Wipe off and neatly

smooth any excess sealant from under the sink

edge. Connect the sink drain to the dispenser drain

system.

MDT6N90

May 2001

Page 3

SEAL

ICEMAKER-

DISPENSER TO

THE COUNTER

TOP OR

MACHINE STAND

Airflow

1 2 3 4 5 6 7 8 ... 27 28

Comments to this Manuals

No comments

Scotsman MDT6N90 Service Manual Page 3

Comments to this Manuals

Related products and manuals for Ice cube makers Scotsman MDT6N90