Scotsman FM2400R Service Manual download pdf (Page 10)

FOR THE ELECTRICIAN

CONFORM TO ALL APPLICABLE CODES

The electrical power to the unit is supplied

through the junction box at the rear of the

machine.

Check the nameplate (located on the back

panel) for the voltage requirements, and for

the minimum circuit ampacity. The machine

requires a solid chassis to earth ground wire.

The ice maker should be connected to its own

electrical circuit so it would be individually

fused. Voltage variation must remain within

design limitations, even under starting

conditions.

Electrically the remote condenser fan motor is

connected to the icemaker at the contactor

terminals for the compressor and the fan

motor operates whenever the compressor

operates.

Electrical connections are made at the

junction box at the back of the icemaker and

at the junction box on the remote condenser.

The remote condenser must be wired to the

icemaker in accordance with local and

national electrical codes with a minimum of 18

Awg. wire with an ground bonding wire

connected to the ground screws provided in

both the condenser and machine field wiring

boxes. All outdoor wiring must be in rainproof

conduit.

All external wiring must conform to

national, state, and local electrical codes.

The use of a licensed electrician is

required to perform the electrical

installation.

TERMINAL STRIP

FOR REMOTE

CONDESNER

ICEMAKER

JUNCTION BOX

POWER

SUPPLY

GROUND

THE

CHASSIS

RAIN PROOF

CONDUIT

FM2400R

December, 1988

Page 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Comments to this Manuals

No comments