Scotsman DCE33PA-1SSD Owner's Manual download pdf (Page 7)

Door Covering

Door Panel

The ice machine is supplied without a conventional

door covering so it can be decorated to the user’s

preference. Scotsman offers several coverings

including white, black and stainless steel. In

addition, a custom built panel can be placed onto

the door.

Door Panel Attachment

To attach a Scotsman supplied panel:

Note: If door swing is to be changed, it must be

done before panel is attached.

The panel will be held on by 6 sheet metal screws

and 2 machine screws.

1. Remove the gasket and retain for later use.

2. If the door panel is stainless steel, remove any

plastic covering the stainless steel panel.

3. Place the panel onto the outside of the door,

and secure it to the door using two machine

screws, located at the left center and right

center.

4. Fasten the panel to the door using the 6 sheet

metal screws. In the hinge area, use the

outermost screw holes.

5. Place the covers over the hinge

areas, and secure each cover to

the door using a sheet metal

screw.

6. Insert hole plug over screw

installed in step 5.

7. Return the gasket to its original

position.

Custom Panel

A custom panel of wood or other material not

exceeding 15 lb can be attached to the door.

Attachment is from the ice side of the door. Holes

are provided in the door for this purpose.

See instructions in information packet to create and

attach a custom panel:

June 2008

Page 6

SCCG50 & SCCP50

Installation and User's Manual

Hole Plug

Cover

Gasket

1 2 3 4 5 6 7 8 9 10 11 12 ... 74 75

Comments to this Manuals

No comments

Scotsman DCE33PA-1SSD Owner's Manual Page 7

Comments to this Manuals

Related products and manuals for Ice cube makers Scotsman DCE33PA-1SSD