Scotsman DCE33PA-1SSD Owner's Manual download pdf (Page 58)

REPAIR

Spray Pump

The water pump that forces the water from the

reservoir through the spray jets.

1. Disconnect electrical power.

2. Open the bin door and locate the three hoses

connected to the water pump.

A. Loosen the hose clamps from the pump hoses.

B. Remove the pump hoses from their

connections.

3. Disconnect water and drain tubes.

4. Carefully pull machine out from its installed

location to expose the back panel.

5. Remove the back panel.

6. Disconnect wires from the top of the pump

motor.

7. Remove two screws holding pump to bin, and

remove the pump from the ice machine.

8. Reverse the above steps to re-assemble.

Spray Jets

Spray Jets are small nozzles that are under the

freezing surface, they spray a narrow pattern of

water at the freezing surface. If plugged or

restricted, poorly shaped ice cubes will form.

If the spray jets are removed the o-rings between

the water inlet tube and the spray jet bases must

be in place (see illustration).

DCE33

September 2011

Page 26

Electrical Shock Hazard

Disconnect Electrical

Power Before Beginning

Removal of Parts

Pump Hose Removal

Spray Pump

(for reference)

Hose Clamp

Suction

Hose

Reservoir

(for reference)

Curtain

Curtain Stiffener

Cap

Spinner

Jet Base

Reservoir

Body

Cube

Chute

O-Ring

Pump

Discharge

O-Ring

Back view of

Reservoir

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 74 75

Comments to this Manuals

No comments