Scotsman C1448 User Manual download pdf (Page 9)

C1448, C1848 D

Air and Water Cooled User Manual

December 2014

Page 8

Uncrate and Set Up

Begin with unpacking the ice storage bin. Remove the

carton, and using part of the carton as a cushion, tip

the bin on its back to remove the skid and attach the

legs or casters.

Note: Turn the leg levelers in all the way and adjust

after the ice machine is on top and in its selected

location.

Return the bin to an upright position. Check the bin

top gasket for gaps and tears, ll any in with food

grade sealant prior to placing the ice machine on the

bin.

Install the bin top adapter if one is required for the

application.

If the ice machine has not been unpacked, do so now.

Remove the carton from the skid. Lift the ice machine

off the skid directly onto the bin.

Note: The machine is heavy! Use a mechanical hoist

if necessary.

Secure the ice machine to the bin with the hardware

provided (two metal straps and 4 bolts).

Level the bin and ice machine using the adjustment

part of the legs.

Bin Recycling

Many times an ice machine head will be replaced,

while the existing ice storage bin will be reused. This

is an acceptable practice, if some precautions are

taken:

• The used bin must be in good condition. Broken

doors, hinges, or warped walls are reason for

considering a new bin.

• The used bin top edge gasket must be replaced.

Water leaks could occur if the gasket tape is not

replaced.

• The used bin should be the proper size for the ice

machine head.

Lower Light and Switch Panel

This user accessible panel provides important

operational information and duplicates the lights and

switches on the controller. It also allows access to

the On and Off buttons that operate the ice machine.

Sometimes access to the switches should be limited

to prevent unauthorized operation. For that purpose

a xed panel is shipped in the hardware package.

The xed panel cannot be opened.

To install the xed panel:

1. Remove the front panel and remove the bezel.

2. Spread the bezel frame open and remove

original door, insert xed panel into bezel. Be

sure it is in the closed position.

3. Return bezel to panel and install panel on unit.

Open door to access On

and Off switch buttons.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 21 22

Comments to this Manuals

No comments

Scotsman C1448 User Manual Page 9

Comments to this Manuals

Related products and manuals for Equipment Scotsman C1448

Relacionado con productos y manuales para Acondicionadores Grain-systems PNEG-924