Scotsman C1448 User Manual download pdf (Page 4)

C1448, C1848, C2148W

Air and Water Cooled User Manual

November 2006

Page 3

Product Information

The product is a modular cuber. That type of machine

is designed to be placed on an ice storage bin or

an ice dispenser. Many installations only require the

matching bin, but some also require an adapter to be

placed between the bin and the cuber or between the

dispenser and the cuber.

This product cannot be stacked. See the chart for

application information.

Model Number Description

Example:

• C1448SA-32B

• C= cuber

• 14= nominal ice capacity in 100s of pounds

• 48= nominal width of cabinet

• S= Cube size. S=small or half dice cube.

• M=medium or full dice cube

• A=Condenser type. A=air cooled. W=water cooled

• -32=Electrical code. -32=208-230 single phase.

-3=208-230 three phase

• B=Series revision code. B=2nd series

Note: In some areas of this manual model numbers

may include only the rst ve characters of the model

number, meaning that the cube size, condenser

type and voltage differences are not critical to the

information listed there.

Options:

There are several eld-installed options that can be

installed at initial start up or later. They include: • KVS

- Vari-Smart adjustable ice level system.

• KSBU - Smart-Board advanced feature control.

• A39515-021 air bafe to reduce air recirculation

around the back of the cabinet when installed in a

corner.

Some installations require bin adapters. See the table

below.

Standard Bin Applications - Adapter information.

Model BH900*, B948S BH1100,

BH1300,

BH1600

C1448, C1848,

C2148

Direct Fit, no

adapter needed

No adapter

needed

* Note. If previously equipped with stainless steel

bafe, KBAFFLE3, remove and replace with original

plastic bafe.

Other Bins & Applications:

Note the drop zone and ultrasonic sensor locations in

the illustrations.

Scotsman ice systems are designed and

manufactured with the highest regard for safety and

performance. They meet or exceed the standards of

UL and NSF.

Scotsman assumes no liability of responsibility of

any kind for products manufactured by Scotsman

that have been altered in any way, including the use

of any part and/or other components not specically

approved by Scotsman.

Scotsman reserves the right to make design changes

and/or improvements at any time. Specications and

design are subject to change without notice.

December 2011

1 2 3 4 5 6 7 8 9 ... 24 25

Comments to this Manuals

No comments

Scotsman C1448 User Manual Page 4

Comments to this Manuals

Related products and manuals for Equipment Scotsman C1448