Scotsman CME500 Manual

IntroductionTo the owner or user: This product manual is asource of information about the installation, startup, cleaning, maintenance and repair of t

Final Check List/Initial Start Up1. Check that electrical power has been supplied.2. Check that a drain, separate from the icemachine, insulated and m

UseBasic ModelAfter the ice machine has operated for a few hours,the HD dispenser can be used. Pushing the icechute back will activate the dispense me

General Care and CleaningPeriodically inspect and clean the ice dispenser tokeep it operating at peak performance.Wash the outside of the dispenser wi

General Care And Cleaning - Continued10. Rinse all areas washed with clean, fresh water.11. Using the ice machine cleaning solution, cleanthe ice gril

MaintenanceSpilled ice and user debris will collect in the icecatch pan, located just below the sink grill.Occasionally the debris will need to be rem

AdjustmentsThe dispenser is preset at the factory. Adjustmentsare rarely needed.Agitation Time Recommendations:The standard time is 3 seconds on every

Service DiagnosisHD22 and HD30September 2003Page 16Symptom Probable Cause Possible FixNo ice is dispensed - Basic Model No power to dispenser Check fo

General DescriptionThe HD22 is a hotel/motel ice dispenser. It isdesigned to use a Scotsman C0322 or C0522cube ice machine as the source for ice.The H

Specifications & LimitationsThis dispenser is designed to be installed andoperated indoors, in a controlled environment. Itsminimum and maximum op

HD30 Dimensioned IllustrationHD22 and HD30September 2003Page 430"762.428"711.210"WATER VALVE HEIGHT(WATER FILLER ONLY)254.86"152.4

HD22 Dimensioned IllustrationHD22 and HD30September 2003Page 528"711.20022"558.86"152.453 1/4"1351.3ICE FILL STATION 8 3/4 [221.

Product DescriptionAll models consist of a plastic lined, insulatedhopper mounted to a metal base. The hoppercontains a 15 blade plastic dispense whee

UnpackingAfter removing the carton, check for theloose-shipped parts packed in the storage bin. Theparts will include a carton with four legs. Removet

Installation - PlumbingDrain:All models of the dispenser have a 3/4" FPT drainfitting at the bottom of the back panel. Connect 3/4"rigid tub

Installation - Electrical and Ice Machine AssemblyThe dispenser is supplied with a power cord. Donot use with an extension cord. The unit must beplugg